HIGH-PRESSURE CONCRETE, PATIO AND PAVER CLEANING IN OCALA, FL
Concrete Pressure Washing in Ocala. Fast Results You'll Love.
Looking for professional driveway or concrete pressure washing in Ocala, Florida? Starr's & Stripes Power Wash provides commercial-grade pressure washing services across Marion, Citrus, Sumter, and Levy Counties. Using high-flow equipment delivering up to 8 gallons per minute paired with professional pre-treatment detergents, we flush embedded oil, tire marks, algae, and irrigation rust out of porous concrete driveways, sidewalks, and pool decks. Standard residential driveway cleaning in Marion County ranges from $100 to $250.
- Serving 4 Counties
- 75+ Communities
- Licensed & Insured
- Certified Power Wash & Soft Wash Pros
- Free Estimates

It Is Not Your Fault Your Driveway Looks Like This.
Concrete looks solid. It is not. Under a microscope, concrete is full of tiny pores that absorb everything that lands on them. Oil from a car leak. Tire rubber from years of pulling in and out. Algae spores that thrive in Florida’s humidity and shade. Iron from your irrigation system leaving orange streaks that no product at the hardware store can touch.
Once that contamination gets into the pores, surface cleaning does not work. You can scrub it yourself all afternoon and it will look the same by Tuesday. The grime is not on the concrete. It is in the concrete.
Meanwhile your neighbors with the clean driveway are not working harder than you. They just found the right tool for the job.
Concrete driveways in Central Florida accumulate oil stains, tire marks, algae, mold, and irrigation iron staining that penetrate the porous surface. Consumer-grade pressure washers and household cleaners lack the flow rate and chemical penetration to remove embedded contamination effectively.
Commercial-Grade Pressure Washing. Built for Results Like This.
The difference between consumer and commercial pressure washing is not just pressure. It is flow rate. Consumer equipment might push two to four gallons per minute. Starr’s & Stripes runs commercial equipment capable of flowing up to 8 gallons per minute. That volume is what creates the hydraulic force to flush contamination out of the pores rather than just pushing it around on the surface.
Combined with professional-grade concrete cleaning detergents applied before the rinse, the result is concrete that does not just look clean. It is clean, down to the pore level. Stains that have been building for years come out in a single visit.
Why Your Pressure Washer Did Not Work.
The rental unit from the hardware store runs at two to three gallons per minute. That is enough to get surface dirt off a patio chair. It is not enough to dislodge years of embedded oil, biological growth, and mineral deposits from a driveway or sidewalk. The flow rate is the missing ingredient, and it is not something you can rent your way to.
Every Concrete and Hard Surface on Your Property.

Driveways
The primary surface for pressure washing. Oil stains, tire marks, algae, and iron staining are removed using high-flow equipment and pre-treatment detergent. Most driveways are unrecognizable after a single visit.

Sidewalks and Walkways
Algae-covered walkways are a slip hazard and a poor first impression. Pressure washing removes biological growth at the root level and restores a clean, safe walking surface. Pairs naturally with driveway cleaning.

Pool Decks
Pool deck concrete takes constant moisture exposure and develops algae and mold that make it slippery and unsafe. Pressure washing removes the biological buildup and restores a slip-resistant surface.

Patios, Lanais and Brick
Outdoor entertaining spaces accumulate mold, food stains, and organic debris in the grout lines and surface texture. Pressure washing strips concrete patios back to clean, while brick pavers, brick walkways, and brick walls get a lower-pressure rinse that cleans the face without eroding mortar joints or washing out paver sand.

Parking Areas
Commercial parking lots and residential multi-car pads collect oil, grease, and tire rubber across large surface areas. Commercial-grade flow rate makes large-area concrete cleaning practical and thorough.

Retaining Walls and Curbs
Concrete block retaining walls and curbing develop algae and dark staining from ground contact and moisture. Pressure washing restores the original surface color and prevents biological deterioration.
INCLUDED IN EVERY PRESSURE WASHING VISIT
- Pre-treatment with professional-grade concrete detergent on heavily stained areas
- High-flow commercial pressure washing at up to 8 GPM
- Surface rinse and visual inspection before the crew leaves
- Landscaping protection throughout the job
- Written estimate provided before work begins
What Happens on the Day of Your Service.

1
Pre-Treatment Application
Before the pressure washer runs, a professional-grade concrete detergent is applied to the surface and allowed to dwell. The detergent begins breaking down oil, biological growth, and mineral deposits from the inside out, loosening contamination from the pores so the rinse can flush it away completely.
2
High-Flow Commercial Pressure Washing
The commercial pressure washing unit runs at up to 8 gallons per minute, creating the hydraulic force needed to flush contamination out of the concrete rather than pushing it around on the surface. The crew works methodically across the surface, overlapping passes to ensure complete coverage.
3
Detail Work and Edge Cleaning
Edges along the garage door, landscaping borders, and expansion joints are cleaned with focused pressure. These are the areas a homeowner using rental equipment typically misses and where the contrast between clean and uncleaned is most visible.
4
Rinse, Inspect, and Walk-Through
The surface is rinsed clean and the crew does a visual pass before packing up. If anything is missed or a stain needs a second treatment, it gets addressed before the job is called complete. The surface should look right before the crew leaves.
5-Star Rated on Google & Yelp
Trusted by Homeowners Across Marion,
Citrus, Levy & Sumter Counties
While We Are There, Many Customers Also Add...

Sidewalk and Walkway Cleaning
Your driveway and walkways are one visual unit from the street. Cleaning the driveway while leaving a stained front walkway cuts the transformation in half. Most customers combine both services in a single visit for a complete front-of-property result.

Paver Sealing
Once your concrete or pavers are clean, sealing them protects the surface from re-staining, enhances the color, and prevents weed growth between joints. Sealing after cleaning locks in the result and extends the time before your next cleaning is needed. It is the smartest follow-up to a pressure washing job.

House Washing
A clean driveway next to a grimy house exterior creates a visible contrast that actually draws attention to the siding. Combining a driveway clean with a soft wash house washing in the same visit creates a whole-property transformation and saves a second scheduling trip.
FAQs
Questions About Pressure Washing in Ocala
How much does pressure washing cost in Ocala, FL?
The price depends on the surface, its size, and how stained it is. A standard driveway is usually the smallest job, while patios, pool decks, walkways, brick and commercial concrete are priced by area. Booking several surfaces in one visit costs less than separate trips. Our pressure washing cost guide shows typical local ranges, and Starr’s & Stripes gives a free written estimate before any work begins. Call (352) 230-9299.
How often should I pressure wash concrete and pavers in Florida?
Most Ocala-area driveways benefit from professional pressure washing once per year. Properties with heavy oak tree canopy, vehicles that park and leak fluids, or significant irrigation contact may benefit from cleaning every six to eight months. Florida’s humidity and heat accelerate biological growth significantly compared to drier climates, so annual cleaning is the minimum most homeowners should plan for.
Can pressure washing remove oil stains from concrete?
Yes, in most cases. Fresh oil stains are easier to remove than older ones. Starr’s & Stripes applies a professional-grade degreaser to oil stains before pressure washing, which breaks down the petroleum at the molecular level before the high-flow rinse flushes it out. Very old, deeply set oil stains may lighten significantly without full removal in a single visit. The team will assess the stain during the estimate and set accurate expectations.
Will pressure washing damage my concrete?
Not when done correctly with the right equipment and technique. The risk of concrete damage from pressure washing comes from using too-narrow a spray tip at too-close a distance, which concentrates pressure in a small area and can etch the surface. Starr’s & Stripes uses appropriate tip selection and stand-off distance for each surface, and the high flow rate at moderate pressure is more effective and less damaging than high pressure at low volume.
What surfaces do you pressure wash, and which ones do you soft wash instead?
We pressure wash hard surfaces: concrete driveways, sidewalks and walkways, patios, pool decks, pavers, brick, parking areas and dumpster pads. Painted surfaces, stucco, vinyl siding, screens and roofs are soft washed at low pressure instead, because high pressure can etch stucco, strip paint, tear screens or force water behind siding. We serve Marion, Citrus, Levy and Sumter Counties. Call (352) 230-9299 for a free estimate.
How long does a pressure washing job take?
Most residential driveways take between one and two hours depending on size and the degree of staining. A double-wide driveway with heavy staining and an attached sidewalk typically takes two to three hours. Larger surfaces, pool decks, or combination jobs take proportionally longer. The team will provide a time estimate along with the price estimate before scheduling.
Do I need to do anything to prepare before the crew arrives?
Move vehicles off the driveway. If you have potted plants or decorative items near the surface being cleaned, move those as well. The crew will pre-wet surrounding landscaping as a standard step before starting. Let them know if there are any fragile items, specific stains you want them to focus on, or access constraints like a gate code.
